<$100 ventilator - open source design

Simon Cock
Posts: 3
Joined: Fri May 01, 2020 6:17 pm

<$100 ventilator - open source design

Post by Simon Cock »

Here's my open source design for a <$100 ventilator, aimed at rapid deployment to Less Economically Developed Countries [LEDCs]/3rd world countries.

Feel free to work on it or share it so interested parties can review it and use it.

The core unit could be rapidly built from 4 x components produced through 3D printing or plastic injection moulding, and other readily available components. It could meet most UK Government Rapidly Manufactured Ventilation System (RMVS) Specifications.

Please feel free to use my design but please let me know how you get on as I would be interested in any success stories.

Thanks for looking and good luck.
Simon
simon.cock@indigoshutter.co.uk
simon.cock@secureresources.co.uk
Attachments
Slide3.JPG
Slide3.JPG (138.76 KiB) Viewed 342 times
Slide2.JPG
Slide2.JPG (126.28 KiB) Viewed 342 times
Slide1.JPG
Slide1.JPG (105.91 KiB) Viewed 342 times

Simon Cock
Posts: 3
Joined: Fri May 01, 2020 6:17 pm

Re: <$100 ventilator - open source design

Post by Simon Cock »

Drawings 4 - 6
Attachments
Slide6.JPG
Slide6.JPG (93.45 KiB) Viewed 341 times
Slide5.JPG
Slide5.JPG (115.99 KiB) Viewed 341 times
Slide4.JPG
Slide4.JPG (72 KiB) Viewed 341 times

Simon Cock
Posts: 3
Joined: Fri May 01, 2020 6:17 pm

Re: <$100 ventilator - open source design

Post by Simon Cock »

Darwings 7-9
Attachments
Slide9.JPG
Slide9.JPG (153.39 KiB) Viewed 341 times
Slide8.JPG
Slide8.JPG (203.45 KiB) Viewed 341 times
Slide7.JPG
Slide7.JPG (83.66 KiB) Viewed 341 times

Post Reply